Discover & PlanShop Now
Applied Ergonomics
APPLIEDERGONOMICS

Environments · Laboratory

Laboratory Environments

Lab work is hard on the people who do it — hours of precise, repetitive work at the bench, often standing, around chemicals and sensitive equipment. We spec the lab around the person: ergonomic seating that prevents strain, casework that cuts the reaching, and the safety equipment that keeps people protected.

Home / Environments / Laboratory

A lab runs on its people, and the work is unforgiving on the body — long hours of focused, repetitive precision at the bench, much of it standing or perched, in a room that can also be hazardous. Our lens is the person in the chair. We spec ergonomic seating that supports a healthy posture through a full shift and heads off the strain injuries that quietly cost labs their most skilled technicians — then equip the room to keep those people safe: chemical-resistant, cleanroom- and ESD-rated surfaces, and fume capture and chemical containment. Furnish it for the work; spec it for the people. Here’s how, and the products we’d start from.

The person
we spec the lab around the worker
Full-shift
ergonomic support that prevents strain injuries
Safe
chemical, cleanroom, ESD & fume-contained
How to spec it

What this room needs.

Seating that protects the body.

Hours of precise, often standing bench work punish the back, neck, and shoulders. Ergonomic lab chairs and stools — bench-height, foot-ring, real posture support — head off the strain injuries that cost labs their skilled techs, and still wipe clean and come cleanroom- or ESD-rated.

Within reach — by design.

Lab strain rarely comes from one heavy lift — it’s the thousand small reaches for a reagent, a pipette, a log, all shift long. We place and height-set casework so the tools and samples a task actually needs sit inside the neutral reach zone, and the scientist keeps posture and focus instead of twisting away from the work every minute. Modular, too — reconfigured as the protocol changes, without rebuilding the room.

Rated to the room.

Chemical-resistant surfaces throughout, cleanroom particulate control to your ISO class, and ESD static-dissipative construction where sensitive work demands it — specified, not guessed at.

Safe from chemicals and air.

Fume capture, filtered chemical storage, and containment for hazardous materials — employee-safety equipment that protects the people in the room and keeps it compliant, right alongside the furniture.

Explore the room

Ideas for a lab.

Bench and task seating for lab work, controlled-environment chairs for cleanrooms and ESD spaces, stools for the bench — plus modular lab casework, and, now introducing to the US, GT Scien chemical-handling and fume capture. Browse, then we’ll match the exact rating to your room.
Lab casework & modular casegoodsSee all casework & modular cabinetry →
Lab safety & chemical handling — GT Scien (now introducing to the US)See all lab air purification & filtration →

Speccing a lab or cleanroom?

Tell us the room — wet lab, cleanroom class, or ESD bench — and how the work is done, and we’ll point you to the exact rated seating and get the details right.

Talk to a design concierge
Spec note · matching the chair to the room

A lab chair is a piece of lab equipment.

In a lab the seat is spec’d to the work, not chosen for comfort alone. Start with the material: polyurethane, vinyl, or self-skinned poly that wipes down and shrugs off reagents — never fabric that soaks up a spill. Add a bench-height range and foot ring for standing-height benches. Then match the room:

Cleanroom (particulate)

Sealed, non-shedding, non-outgassing construction certified to your ISO class — no exposed foam, cleanroom-wipeable. Particulate-rated seating is Biofit and Cramer.

ESD / static-control

Static-dissipative or conductive materials with a grounding path (casters/glides) — for electronics assembly and sensitive instruments. Options from GK Chairs, Cramer, and Biofit; Bimos likely (US stock to confirm).

The rule: match the seat to the room’s requirement — cleanable for a wet lab, particulate-rated for a cleanroom, static-safe for ESD — and don’t over- or under-spec. Tell us the room and we’ll point you to the exact rated chair.

Keep exploring

Related environments.

Questions, answered.

About Laboratory Environments

What makes a lab chair different from an office chair?
Materials and range. A lab chair uses cleanable, chemical-resistant seat surfaces (polyurethane, vinyl, or poly) instead of fabric, offers a bench-height range and foot ring for standing-height benches, and is built for heavy daily use. Controlled-environment versions add cleanroom particulate-control or ESD static-dissipative construction.
Cleanroom, ESD, or standard lab seating — which do I need?
Match it to the room. A general wet lab needs cleanable, chemical-resistant seating. A cleanroom needs particulate-rated, non-shedding construction certified to its ISO class. An ESD or electronics bench needs static-dissipative or conductive materials with a grounding path. Tell us the room and we’ll spec the exact rating.
Can lab seating handle chemical spills and daily cleaning?
Yes — that’s the point of the materials. Polyurethane, vinyl, and self-skinned poly seats wipe down, resist common reagents, and stand up to routine decontamination, with no fabric to absorb a spill or trap contamination.
Do you carry cleanroom and ESD-rated seating?
Yes. Particulate-rated cleanroom seating comes from Biofit and Cramer; static-control (ESD) options come from GK Chairs, Cramer, and Biofit, with Bimos likely (US stock to confirm). We match the chair to your ISO class or ESD requirement.

Working with Applied Ergonomics

What types of projects does Applied Ergonomics work on?
We work on projects of all sizes, from single-office setups to multi-floor corporate buildouts. Our services span workspace strategy, interior design, furniture specification, procurement, project management, and installation across healthcare, education, corporate, industrial, and hospitality environments.
How does the consultation process work?
We start with a conversation to understand your goals, challenges, and timeline. From there we develop a tailored approach that may include space planning, product recommendations, and a detailed proposal. There’s no obligation, and we’re happy to answer questions at any stage.
Do you work with architects and interior designers?
Absolutely. We regularly partner with architects and interior designers as a technical and execution resource, translating design intent into specific, high-performing solutions.
What geographic areas do you serve?
We serve clients nationally. While we’re headquartered in the Chicago area, our project management and installation capabilities extend across the United States.
Do you support ongoing facility needs after a project is complete?
Yes. We remain a consistent point of contact beyond project closeout—handling warranty coordination, reconfigurations, internal moves, modular system relocation and reuse, redesigns, and more. Our goal is continuity, not re-procurement.
Get in touch

We’re here to help.

What happens next

We read every inquiry and follow up personally to help move your project forward.

Not sure exactly what you need? Tell us the space and the teams who’ll use it, and we’ll bring the options to you. Specifying is what we do.

Prefer to talk it through? Call 847-679-5148.

Phone: 847-679-5148   Email: info@appliedergonomics.com

Chat with us
Copyright © 2013-present Magento, Inc. All rights reserved.